http://qiaodahai.com/
Phoenix BIOS刷新工具Winphlash和Phlash16
1、Winphlash是Windows中常用的Phoenix BIOS刷新工具，支持XP/Vista/7。
使用Winphlash时如果需要设置高级选项，需要修改PHLASH.INI，找到Advanced=0，将0改为1，保存即可。
2、Phlash16是DOS下的Phoenix BIOS刷新工具，必须运行于纯DOS环境。其帮助文档如下：
Phoenix Flash Utility for DOS- Version 1.6.8.8
Copyright (c) Phoenix Technologies Ltd., 2000-2008
USAGE: PHLASH16 [options] [@rspfile] [romfile]
romfile Override the default BIOS image name BIOS.WPH with “file”.
@rspfile Response file containing more options
/A:address 32 bit address where to put the File Image.
/B:file Override the default BIOS image name BIOS.WPH with “file”.
/BBL Program boot block.
/BU[=name] Backup flash memory into BIOS.BAK before programming.
If “name” specified, override the default filename BIOS.BAK.
/C Clear CMOS checksum after programming.
/CS Verify BIOS.WPH image checksum.
/DMC:string Specify chassis manufacturer DMI string.
/DMM:string Specify motherboard manufacturer DMI string.
/DMS:string Specify system manufacturer DMI string.
/DOxx:string Specify OEM DMI string number xx.
/DPC:string Specify chassis asser tag number.
/DPM:string Specify motherboard product ID DMI string.
/DPS:string Specify system product ID DMI string.
– More –
/DSC:string Specify chassis serial number DMI string.
/DSM:string Specify motherboard serial number DMI string.
/DSS:string Specify system serial number DMI string.
/DUS:string Specify UUID DMI string.
/DVC:string Specify chassis version DMI string.
/DVM:string Specify motherboard version DMI string.
/DVS:string Specify system version DMI string.
/DESC Check the descriptor mode.
/DEV Display device information from WPH file.
/EXIT Exit without rebooting.
/E2 Generate a new UUID when current UUID is (FFF…FFF).
/H or /? Help screen.
/I Verify image size matches flash part size.
/MODE=n Specify mode n (0, 1, 2, 3).
/MFG Manufacturing mode – Automatically reboot without keypress.
/N Program only if BIOS.WPH is different than system BIOS.
/NOB Do not allow an older BIOS to be flashed to the platform.
/NIC Update network controller driver with *.lom files.
/NOBIOSINFO Do not display BIOS date and part number while flashing.
/O Override (disable) all options from BIOS.WPH.
/P Production mode (minimize messages and delays).
– More –
/PF=string String to pass on to command line.
/PN Program only if same BIOS part number.
/REMOTE Specify remote operation over RS232
/RO[=name] Read contents of flash part and save to a file.
/R=n Retry flashing a block n times if flash fails.
/S Silent operation (turn off speaker).
/SWAP=NO Disable Axx autodetection.
/T Show debug timing info (Warning: flash is done TEN TIMES!)
/V Verify each block after programming it.
/VBL Show warning for Vista Bitlocker.
/VGA Update VGA module with *.dat files.
/X Ignore XMS memory manager check.
/Z Zero before erasing a block.
/UUID Generate a new UUID .
/DOSKEY Ignore DOSKEY check .
/Mod:filename Update current system BIOS with the module specified by
filename.
/Fbin:filename Update current system BIOS DMI with the interface file
specified by filename, do not need image file.
/FileUUID Generate a new UUID to BIOS image(Will not flash).
/ShowFileUUID Show UUID of a BIOS bin file.
/Force Update BIOS from image file directly without any modification.
To update entire system BIOS you also need the following file:
BIOS.WPH (the interface file with the BIOS image)
Related posts:
